■ Window Design Program - MCMURTA ®
Research and Development of Efficient Window with better results in thermal and acoustic insulation. The MCMurta has as main products, the double and triple glazed windows, with various types of openings, in the system wood-wood and wood-aluminum.

Construction in Wooden-Windows

"The comfort and beauty of wood, a natural harmony with the rest of the carpentry and furniture inside your home."


Double glazed framework in Wooden windows MCMurta system.

1. Profiles in laminated wood to ensure stability against warping;
2. A traditional and noble product, but allied to the latest technologies of thermal and acoustic insulation and sealing;
3. Natural harmony with other carpentry and furniture inside your home;
4. Double glazed with SGG Climalit warranty;
5. Glass base with 6 [mm] in the exterior + 14 [mm] chamber + 4 [mm] inner glass;
6. EPDM sealants, fire resistant;
7. Framework sytem with the best Heat Transfer Coefficients "U", W/ (m²•K), in the market;
8. It avoids the phenomenon of condensation on the inside;
9. Easy to install on the jobsite;
10. Product with an ecological end-of-life;
11. Its appearance can be modified by the end costumer;
12. All sorts of solutions to reconstruction work;
13. Easy adaptability to trends in architecture;
14. Highly resistant to fire through the application of water-based impregnating resins;
15. Hardware with the best security systems through a multi-point locking with locking points in mushroom head;
16. Hardware of high durability and resistance against salt corrosion;
17. Available in all opening systems in the market.

Wood-Aluminum Construction

"The Comfort of Wood on the inside and the Aluminum Profile on the outside; This system adapts to a wide range of openings used increasingly in European construction."


Double glazed frame in Wood-Aluminum system MCMurta

1. Profiles in laminated wood for stability against warping;
2. Maintenance-free exterior due to the aluminum cladding;
3. Traditional and noble product, but allied to the latest technologies of thermal and acoustic insulation and sealing;
4. Aluminum profiles Benaco Systemin in all types of finishes in the market;
5. System that allows total air tightness;
6. Double glazed with SGG Climalit warranty;
7. Glass base with 6 [mm] in the outside + 16 [mm] Chamber + 4 [mm] inner glass;
8. Three levels of thermal and acoustic sealing with EPDM sealants, fire resistant;
9. Framework system with the best heat transfer coefficient "U", W/ (m²•K), in the market;
10. Easy to install on the jobsite;
11. All sorts of solutions for reconstruction works;
12. Highly resistant to fire through the application of water-based impregnating resin;
13. Easy adaptability to trends in architecture;
14. Hardware with the best security systems through multi-point locking with locking points in mushroom head;
15. Hardware with high durability and resistance to salt corrosion;
16. Available in all opening systems on the market.

Features of the System


1.
Glass sealant in EPDM coextruded, allowing mounting without cuts in the corners;
2. Profile edges with accented rounded off for a refined design and coating protection;
3. Sealant for frame-sheet in EPDM coextruded with bonded angles for better insulation;
4. Airtight sealing in EPDM in the interior chamber with bonded angles;
5. Decompression chamber allows the total release of rainwater avoiding any contact between water and wood;
6. Excelent drainage to the outside;
7. Possibility of using fastening clips of various models (key, pressure, etc.).. These clips prevent any contact between wood and aluminum allowing for expansion free of tension, ensuring aeration of the wood and allowing for elimination of condensation on the aluminum;
8. Sealant for glass mounting in EPDM coextruded. Facilitates the mounting of glass and in the event of an aftermost accident the replacement of the glass is easier and quicker;
9. Possibility of using wood of the same thickness in both the rim and the leaf. Usually we use 70x56mm rim sections and 81x56mm or 81x63mm leaf sections;
10. Profile option 81x63mm: acoustic seal for better insulation;

 

Aluminum Alloy:
The aluminum profiles are made of aluminum-magnesium-silicon-designated Al Mg Si 0.5, numerical designation 6060 (UNI 3569). Commonly known as aluminum alloy, hardened through heat treatment for architectural structures.
Has excellent corrosion resistance properties, mechanical strength, easy welding and is aesthetically pleasing.

Tolerances:
The aluminum profiles are extruded with general tolerances according to the UNI 3879 standards.

Surface finishing:
The aluminium profiles are superficially lacquer cladded according to RAL chart, or you can also get anodized finish or lacquered imitating wood textures.
Tests carried out:


The wood-aluminum Garda System has been submitted and approved, to the following tests:


-
On 21.11.1996 in laboratory tests "Consorcio Legnolegno di Reggio Emilia" according to UNI EN with certificate No. 37/96;
- On 06.27.1997 at IFT (Window Technology) of Rosenheim, in accordance with DIN 18055, by certificate no. 105 18151
Fixing clips were submitted and approved in:
- On 22.07.1997 at IFT (Window Technology) of Rosenheim, with the certificate no. 106 18 151.


LAMINATED WOOD

Our carpentries are made of laminated wood in order to obtain very small dimensional variability.

The drying of wood in a heated environment and the laminating of profiles is done in our facilities, ensuring a very high quality end product.

The most commonly used woods are:
Cone, Chestnut, Oak, New Riga, Afzelia, Iroko Kambala, Brazilian Cherry, Sipo (Utile).

HARDWARE

Hardware used:

Its origins are, Austrian and German, highly resistant to salt corrosion.
Allied to the latest technologies in the market.


GLASS

The glass used is the Saint Gobain:

The standard glass used is:
Planilux 6 mm + box 16 mm + Planitherm 4 mm.

The glass represents an extremely important factor at the aesthetic, safety and climatisation level, in our carpentry.
In case other types of combinations are required, contact us as it may be necessary to change some details of construction and/or others.


Our sealants are made of EPDM, which does not combust and can withstand a broad range of temperatures.
To directly see our products, visit our showroom, where you can observe the systems we produce.

If necessary, we provide free samples of window corners and technical drawings on paper or digital (dwg) for Cad.

Open Systems

The MCMURTA ® system adapts to a wide range of openings increasingly used in European construction.

Among the most commonly used, these stand out:
- Dangle-jamb;
- Tipper parallel runners;
- Pleated or harmonium runners;
- Elevating runners;
- Pivotables;
- Projectables;
- Etc.

 

Advantages of MCMURTA® system:
- Natural Beauty, guaranteed through the materials we use;
- Very good thermal and acoustic insulation;
- Guaranteed waterproof to rainwater;
- Ensured stability and durability of the set;
- Fast and easy installation;
- Amazing aesthetic results;
- Reduced maintenance. 		The most used woods in this system are:
Cone
Pinus sylvestris
Chestnu
Castanea sativa
American Oak
Quercus rubra
New Riga
Pinus larice
Afzelia Doussie
Afzelia bipindensis
Iroko Kambala
Chlorophora excelsa
Brazilian Cherry
Amburana cearensis
Sipo
Entandrophragma utile



"Environmentally Friendly" "Timber from sustainable forest management practices."